Thanks to the automatic processing technology, The mass production for all the sheet metals in electric appliances can be easily achieved. The most unforgettable application is electric cabinets. Almost all the electric cabinets you can see in the streets or in home or in factory. All can be proceeded by the coil processing system. Which including the technology of punching, bending and laser cutting system.
The completely tailored solutions for your requirements. Our coil sheet processing system can be combined with panel bender for sale, laser cutting, or turret punching. It's suitable for mass production especially for some standard products.
Great performance for the final profiles, thanks to the turret punching or precise laser cutting technology, it's easy to have the sustainable precise and accuracy profiles.
24 hours unmanned manufacturing, max reduce the cost on materials and labors. Meanwhile the energy consumption is very low when the sheet metal coil cutting machine runs.
Remcor sheet metal coil line can process galvanized steel, stainless steel and aluminum which are mostly used in electric cabinets. All of the production steps are handled from the coil material levelling, punching, shearing, bending, and corner finishing by welding or clinching– all the steps until finish the assembling.
punch + bend line solution can be produced for the enclosure doors with an integrated corner forming machine, a trimming shear and a grinding machine to finish up the end-product.
Usually there have holes and corners need to be pre-cut or formed by coil fed punching machines before bending. Profile-frames are typically large series with standardized width or height, so the recommendation is to use coil manufacturing. Mounting plate kit production requires a lot of single parts so the feasible way is to have the production from blanks.
The challenges for bending are the variable part sizes and small series production. For most standard electric cabinets, the profiles can be processed with the help of bending tools. It is not complicated with one or two upward-bends and rarely a Z-bend for door insulation.
English
русский
